Cost guide
What a Paver Patio or Walkway Costs in Florida
As of October 2026, a paver patio or walkway in Florida runs $10–$17 per square foot installed in concrete pavers, more in travertine. A 400 square foot patio lands near $4,000 to $6,800 before a fire pit, lighting or a seat wall. We quote paver patios, walkways and lanai extensions by scope across Greater Orlando and Sarasota–Manatee.
By the Opera Concrete & Pavers estimating team · Updated October 1, 2026
Get a free estimate
Tell us about the project and we'll call to set up a free site visit.
How much does a paver patio cost in Florida?
An installed paver patio or walkway in concrete pavers runs $10–$17 per square foot in Florida and national market data as of October 2026, with most jobs landing nearer $12–$16 (HomeGuide). Travertine runs well above that, from $13 to $45 per square foot depending on the cut and finish (HomeGuide, travertine). Those per-square-foot numbers are a planning figure, not a bid. What a specific patio costs depends on how much old concrete, sod or landscaping has to come out first, how far a wheelbarrow or skid steer has to travel to reach the work, and whether the layout is a plain rectangle or a shape with a lot of cut borders around a fire pit or pool cage post.
How much does a 400 sq ft paver patio cost?
A 400 square foot patio in concrete pavers runs roughly $4,000 to $6,800 at current Florida market rates, in line with HomeGuide's own worked example for a 20 by 20 ft patio at $3,800 to $6,800. Smaller seating areas and larger full-backyard patios scale from there.
| Patio size | Area | Market range at $10–$17/sq ft |
|---|---|---|
| Small seating area (10 × 10 ft) | 100 sq ft | $1,000–$1,700 |
| Standard patio (12 × 12 ft) | 144 sq ft | $1,440–$2,450 |
| Lanai extension (16 × 20 ft) | 320 sq ft | $3,200–$5,440 |
| Full backyard patio (20 × 20 ft) | 400 sq ft | $4,000–$6,800 |
| Large entertaining patio (24 × 25 ft) | 600 sq ft | $6,000–$10,200 |
Arithmetic on the published Florida range of $10–$17 per square foot, October 2026; close to HomeGuide's own 12 × 12 ($1,400–$2,500) and 20 × 20 ($3,800–$6,800) examples (HomeGuide). None of these rows include a fire pit, seat wall or travertine upgrade.
How much do pavers cost per square foot installed?
Installed pavers run $10 to $30 per square foot nationally across every material, with concrete pavers, the material most patios in both service areas use, narrower at $8 to $15 (HomeGuide, pavers per sq ft). The paver unit itself is a small share of that: material averages $2 to $4 per square foot, with labor, base and bedding sand making up the rest. A separate HomeGuide guide prices a dedicated paver walkway considerably higher, $15 to $40 per square foot, with a 200 square foot walkway running $3,000 to $8,000 (HomeGuide, paver walkway). That spread between a walkway and an open patio isn't a typo in either guide; a narrow 3- or 4-foot-wide walk needs the same base, edge restraint and compaction equipment as a wide patio but spreads that fixed cost over far less square footage, and a walkway usually has more linear feet of cut border per square foot than an open field does. A front walkway tied into a larger patio, rather than priced as its own standalone job, usually lands closer to the patio rate than the walkway-only figure above.
Paver patio cost by material
Concrete pavers and travertine solve the same layout problem at very different price points, and the gap between them is almost entirely the material cost, not the labor to set it in place.
| Material | Range per sq ft | Installed total |
|---|---|---|
| Concrete pavers | $10–$17 | $2,500–$4,250 |
| Travertine | $13–$45 | $3,250–$11,250 |
HomeGuide, paver patios; HomeGuide, travertine. Clay brick and porcelain sit between the two in published Florida pricing, though patio-specific data for either material is thinner than for concrete or travertine.
Is paver patio pricing different in Orlando and Sarasota–Manatee?
No Florida-specific cost guide breaks out paver patio pricing by metro the way Angi does for concrete driveways; every patio figure in current published data, from HomeGuide's per-square-foot ranges to its sized examples, is national rather than tied to Orlando or Tampa. A Lakewood Ranch patio and a Kissimmee patio start from the same per-square-foot range. What actually separates the two bids is the soil under each lot, whichever jurisdiction's permit desk reviews the plan, and how much of the old yard needs to come out, not which service area the address sits in.
What moves a paver patio quote up or down
A flat per-square-foot number hides the line items that decide where a specific bid lands inside that range.
| Factor | What it does to the price | Florida detail |
|---|---|---|
| Removing an old slab or patio | Adds to the job before the new base goes in | Concrete removal runs $3–$8/sq ft nationally including disposal (HomeGuide) |
| Base depth | A standard 4 in. base over well-drained soil costs less than 6–8 in. over wet flatwoods ground | Set by soil condition, not by square footage alone |
| Access | A patio reached only through a gated side yard or under a screen enclosure track takes longer to build | Common on Florida lots with a pool cage or a fenced backyard |
| Permits | A zoning or engineering review adds a line item | Orange County charges about $38 for the permit plus $38 for engineering review on a paver patio (Orange County) |
| Fire pit or seat wall | A denser base detail and extra edge restraint under the add-on | Priced separately from the open paver field |
Ranges drawn from the Florida and national sources cited on this page; not every factor applies to every lot.
Two paver patio budgets, worked through
Say you have a cracked 300 square foot concrete slab behind a 1980s ranch in Winter Garden that you want to pull out and replace with a concrete-paver patio. Removal runs roughly $900 to $2,400, and the new paver field at $10–$17 per square foot runs $3,000 to $5,100, putting the full job in the neighborhood of $3,900 to $7,500 before a fire pit or seat wall, with the final number landing lower for a plain rectangular layout and higher for one with a lot of cut borders around an existing pool cage post.
Say instead you have a bare, newly sodded backyard on a 2010s lot in Lakewood Ranch and want a 250 square foot travertine patio off the lanai, with no demolition involved. At $13 to $45 per square foot, that runs roughly $3,250 to $11,250 for the paver field alone, a wide spread that mostly tracks the specific travertine cut and pattern chosen rather than the base work underneath it, which follows the same compaction spec regardless of material.
Cutting the price without cutting the base
The compacted base under a paver patio is the one place a bid shouldn't get thinner just to hit a number; a shallow or under-compacted base is what shows up as a sunken joint or a rocking unit within a season or two. There are still real ways to bring a patio quote down:
- Choose concrete pavers over travertine or porcelain. The material, not the base work, is most of the gap between them.
- Keep the footprint a simple rectangle. A curved edge or a layout cut around several existing trees or a pool cage adds labor time a straight run doesn't need.
- Pour or lay a patio and a connecting walkway in the same mobilization rather than as two separate visits, splitting one crew day and one set of base equipment across both.
- Ask whether an existing concrete slab is sound enough to serve as part of the compacted sub-base for pavers set on top, where grade allows, instead of a full tear-out.
- Schedule outside the rainy season's busiest stretch, when a crew juggling fewer storm delays often has more room to work with on timing.
What a paver patio quote should spell out
A square-foot number alone doesn't say much. Ask every bidder for the same list so the totals describe the same job:
- Compacted base depth, written down, not just that a base exists
- Paver thickness and the specific material, brand or color, not just 'pavers'
- Edge restraint as its own line item; it's invisible once the job is finished and easy to leave off a cheap bid
- Whether removal and haul-off of an existing slab, sod or landscaping is included or billed separately
- Who applies for any required permit, and whether the fee is in the price; a contract over $2,500 also triggers Florida's Notice of Commencement paperwork, recorded with the county clerk before anyone breaks ground (F.S. 713.13)
Related reading
For the full build spec, see our paver patios and walkways page, which covers base depth, drainage slope and the step-by-step install. If concrete is still on the table, our stamped concrete vs. pavers comparison and travertine vs. concrete pavers go through the trade-offs. Paver patio ideas for Florida backyards and extending a patio under a screen enclosure are worth a look before the first bid, and how to compare quotes line by line covers what to ask for in writing. The cost guide hub rounds up current pricing for every other service we quote.
Frequently asked questions
How much does a 400 sq ft paver patio cost?
At current Florida market rates of $10–$17 per square foot, a 400 square foot patio in concrete pavers runs roughly $4,000 to $6,800, close to HomeGuide's own worked example of $3,800 to $6,800 for a 20 by 20 ft patio. A travertine patio the same size costs considerably more; the material, not the base work, drives that gap.
How much do pavers cost per square foot installed?
Nationally, installed pavers of any material run $10 to $30 per square foot, with concrete pavers, the most common patio material in both service areas, narrower at $8 to $15. A separate guide prices paver walkways higher, $15 to $40 per square foot, because a narrow walk carries the same fixed base and edge-restraint cost as a wide patio over far less area.
Are paver walkways priced the same as paver patios per square foot?
Not usually. A connecting walkway 3 to 4 feet wide needs the same compacted base, bedding sand and edge restraint as an open patio, but spreads that cost over much less square footage, which is why dedicated walkway pricing runs well above open-patio pricing per square foot. A walkway built as part of a larger patio project, rather than priced on its own, typically comes in closer to the patio rate.
Is travertine much more expensive than concrete pavers for a patio?
Yes, usually two to three times the material cost. Concrete pavers run about $10 to $17 per square foot installed; travertine runs $13 to $45 depending on the cut, pattern and finish. The base, bedding sand and edge restraint underneath cost about the same regardless of which material goes on top.
Does a paver patio quote usually include the base and edge restraint?
It should, but not every bid itemizes them the same way. A complete price covers excavation, compacted aggregate base, bedding sand, edge restraint and joint sand along with the pavers themselves. If a quote lists only a per-square-foot paver price with no base depth stated, ask; the base is where a cheap bid usually cuts a corner that doesn't show up until a season or two later.
Why do two paver patio quotes for the same size come back so different?
They're often describing different scopes. One bid may include demolition of an existing slab, a 6-inch base on soft ground, edge restraint and permit fees; another may assume a bare, well-drained lot and skip one or more of those lines. Comparing the line items, not just the bottom-line total, is the only reliable way to tell whether two numbers describe the same job.
Does adding a fire pit or seat wall raise the per-square-foot price?
It raises the total more than it raises the rate on the open paver field around it. A fire pit needs a denser base detail under the ring itself and its own edge restraint, and a seat wall adds a short run of block and footing, both priced as separate line items rather than folded into the patio's per-square-foot number.
Ready for a price on your project?
Request a free estimate
Tell us about the project and we'll call to set up a free site visit.